fubarx@lemmy.world to Technology@lemmy.worldEnglish · 3 days agoCode-execution flaw in UEFI firmware affects most servers on planet Eartharstechnica.comexternal-linkmessage-square94linkfedilinkarrow-up1450arrow-down19file-text
arrow-up1441arrow-down1external-linkCode-execution flaw in UEFI firmware affects most servers on planet Eartharstechnica.comfubarx@lemmy.world to Technology@lemmy.worldEnglish · 3 days agomessage-square94linkfedilinkfile-text
minus-squareKairos@lemmy.todaylinkfedilinkEnglisharrow-up3arrow-down1·23 hours agoHave you tried removing the CMOS battery?
minus-squaremuusemuuse@sh.itjust.workslinkfedilinkEnglisharrow-up3·19 hours agoYes. Didn’t help. That board is dead. Secure boot sucks
minus-squareKairos@lemmy.todaylinkfedilinkEnglisharrow-up1·19 hours agoHmm. There might be a way to manually flash the storage/memory but it’d be hard.
minus-squaremuusemuuse@sh.itjust.workslinkfedilinkEnglisharrow-up4·19 hours agoStorage was removed. Still wouldn’t reach firmware. The bios needs reflashed and this stupid board has no recovery because WHY DOESNT IT HAVE A RECOVERY FEATURE!?
minus-squareKairos@lemmy.todaylinkfedilinkEnglisharrow-up1·15 hours agoThe firmware should be on an EEPROM or something
minus-squaremuusemuuse@sh.itjust.workslinkfedilinkEnglisharrow-up3·15 hours agoIt’s on a bios chip that I desolder, reflash, and solder again. If I had the skills and the reader. So I’m just merging more things into one server and reducing power consumption by collapsing VMs into containers to offset the difference.
minus-squareKairos@lemmy.todaylinkfedilinkEnglisharrow-up1·13 hours ago sh.itjust.works Not the motherboard
minus-squareKairos@lemmy.todaylinkfedilinkEnglisharrow-up1·13 hours agoYeah its not worth the effort. Wanted to check just in case you didn’t :3
Have you tried removing the CMOS battery?
Yes. Didn’t help. That board is dead. Secure boot sucks
Hmm. There might be a way to manually flash the storage/memory but it’d be hard.
Storage was removed. Still wouldn’t reach firmware. The bios needs reflashed and this stupid board has no recovery because WHY DOESNT IT HAVE A RECOVERY FEATURE!?
The firmware should be on an EEPROM or something
It’s on a bios chip that I desolder, reflash, and solder again.
If I had the skills and the reader.
So I’m just merging more things into one server and reducing power consumption by collapsing VMs into containers to offset the difference.
Not the motherboard
Yeah its not worth the effort. Wanted to check just in case you didn’t :3